Complete Infill Extraction
Specialized vacuum extraction equipment removes compacted, contaminated, or depleted infill from the full turf profile without fiber damage—providing a clean base for fresh infill installation.
Speak with our Irving turf team
214-225-2894Back to Services
Artificial Turf Infill Refresh in Irving, TX
Compacted, contaminated, or depleted infill is the most common reason artificial turf that was installed correctly starts to feel wrong. Artificial Turf of Irving extracts old infill, cleans the turf profile, and installs fresh infill calibrated to your surface type—restoring performance without replacement.
Service Overview
Infill is the material distributed through the turf fiber base that keeps blades upright, cushions the surface, facilitates drainage, and—in pet areas—manages odor. It's the part of an artificial turf system that no one thinks about until it stops working. And in the Irving market, it stops working faster than property owners expect, for reasons specific to the local environment.
North Texas's combination of intense UV, high summer temperatures, convective storm saturation cycles, and heavy windblown particulate from the DFW Airport corridor accelerates infill degradation relative to cooler or drier climates. Traffic compaction in Las Colinas townhome courtyards, pet waste concentration in Valley Ranch and Hackberry Creek backyards, and the organic debris load from the tree canopy in Cottonwood Valley and Plymouth Park all contribute to infill breakdown at rates faster than what standard product warranties assume.
The signs that infill refresh is needed are diagnostic: a surface that feels noticeably harder than it did when the turf was installed, fibers that no longer stand upright after brushing, drainage that has slowed compared to the first years after installation, odor in pet areas that develops faster than it should given cleaning frequency, and visible bare-looking zones where infill has been displaced toward the perimeter. Any of these signals merit an infill assessment.
Artificial Turf of Irving performs infill refresh using specialized vacuum extraction equipment that removes old material from the turf profile without damaging fiber or backing, followed by base and fiber cleaning to eliminate accumulated contaminants, and fresh infill installation at specified depth for the turf type and use application. For pet areas, we use zeolite-dominant infill blends that neutralize odor compounds rather than trapping them. For landscape turf, we specify silica-based infills appropriate for the fiber type and use pattern. For putting greens, infill specification affects playing speed and is calibrated to the desired stimp rating.
Infill refresh extends useful turf life by three to five years on installations that still have structurally sound fiber and backing, at roughly 15 to 25% of the cost of full replacement. For the large installed base of mid-2010s turf in the Irving and Las Colinas residential and commercial market, this represents a clear value proposition before the replacement conversation becomes necessary.
Scope Highlights
What this service includes
Fiber and Base Cleaning
After extraction, the exposed fiber surface and base layer receive thorough cleaning to remove organic accumulation, airborne particulate from the DFW corridor, and contaminants that would compromise fresh infill performance.
Infill Specification by Application
Different turf applications require different infill types—zeolite blends for pet areas, silica specifications calibrated to fiber type and traffic load for landscape turf, specific products for putting surfaces. We specify appropriately.
Odor Elimination for Pet Zones
Complete extraction of odor-saturated old infill, enzyme treatment of the turf profile, and installation of fresh zeolite-forward infill delivers immediate and sustained odor improvement in high-use pet areas.
Drainage Performance Restoration
Fresh infill at proper specification restores the permeability pathways that compacted material blocks—often resolving mild drainage slowdowns without requiring base work.
Fiber Support and Blade Upright Restoration
Correct infill depth and distribution physically support the fiber blades in upright position. This is the primary correction for matted appearance that grooming alone cannot fix.
Temperature Management Upgrade
Infill refresh is an opportunity to upgrade to heat-reflective infill blends or lighter-specification materials that reduce surface temperature in high-sun exposure zones—a meaningful quality-of-life improvement in Irving's July and August heat.
Cost-Effective Turf Life Extension
Infill refresh at 15 to 25% of full replacement cost extends useful turf life three to five years on installations with sound fiber and backing—the right financial choice before replacement becomes necessary.
Delivery Steps
How this service is delivered
Step 1
Infill Condition Assessment
Our technician evaluates infill depth and distribution across the installation, checks compaction levels in high-traffic zones, assesses drainage performance, identifies pet area contamination, and confirms that fiber and backing are structurally sound before refresh is recommended.
Step 2
Infill Specification Selection
Based on turf type, usage pattern, and any specific performance concerns, we specify infill product type, blend ratios, and target installation depth for the refresh. Pet areas, landscape turf, and putting surfaces each receive appropriate specification.
Step 3
Old Infill Extraction
Vacuum extraction equipment removes old infill systematically across the installation without damaging fiber or backing. Extracted material is removed from the property for appropriate disposal.
Step 4
Turf Profile Cleaning
Exposed fiber surfaces and the base layer beneath are cleaned to remove accumulated organic matter, airborne particulate, bacterial contamination in pet zones, and any debris that would compromise fresh infill performance.
Step 5
Fresh Infill Installation
New infill is applied at specified depth using calibrated spreading equipment for even distribution, then power-broomed into the fiber profile to proper installation depth with consistent coverage across the entire surface.
Step 6
Surface Grooming and Performance Verification
The refreshed surface is power-broomed to restore fiber upright position, drainage performance is verified with a controlled water flush, and the finished installation is documented with a condition report noting baseline performance metrics.
Common Questions
FAQ for Infill Refresh
How do I know if my Irving turf needs infill refresh versus replacement?
If the fiber blades are structurally intact (not brittle, not cracking at the base, not UV-bleached to gray), the backing is secure, and seams are holding, infill refresh is the right intervention. The surface may look tired—matted, flat, slightly discolored—but these are infill symptoms, not fiber damage. If fibers are breaking under foot traffic, backing is delaminating, or seams are failing across multiple areas, replacement is more appropriate.
How much does infill refresh cost in the Irving area?
Residential infill refresh for average-sized yards in the Irving, Las Colinas, and Valley Ranch area typically runs from $800 to $2,500. Larger properties or heavily compacted installations requiring more extraction work run from $2,500 to $5,000. Commercial properties are quoted based on square footage and condition. All projects are estimated after on-site assessment.
What infill types do you offer?
Standard antimicrobial-coated silica sand for general landscape applications; zeolite mineral infill for pet areas and odor-sensitive zones; zeolite and silica blends for high-use residential lawns with pets; heat-reflective coated infill for high-sun exposure installations in Las Colinas and south-facing sites; putting green-specific infill calibrated to target stimp specifications. We recommend the appropriate product for your installation during the assessment.
How long does infill refresh take?
Most residential infill refresh projects complete in one to two days. The process covers old infill extraction (several hours), profile cleaning, fresh infill application, and surface grooming. Larger commercial installations may require two to three days. We schedule with minimal disruption to adjacent occupied spaces.
Will infill refresh fix my drainage problem?
Infill compaction is the most common cause of mild drainage slowdown in older turf installations, and infill refresh often restores drainage performance to near-original specification when this is the root cause. If drainage failure stems from base settlement, grade issues, or backing failure rather than infill compaction, refresh alone will not fully correct it. We assess drainage performance during the initial inspection and advise accordingly.
How often should infill be refreshed in the Irving climate?
Most Irving and Las Colinas area residential installations benefit from infill refresh every three to five years. Pet areas and high-traffic commercial surfaces may warrant refresh every two to three years. The accelerated infill degradation factors in the Irving market—intense UV, high heat, DFW corridor windblown particulate, and active pet use in compact yards—push the cycle toward the shorter end of that range compared to turf in cooler or drier climates.
Will infill refresh eliminate pet odors in my yard?
Infill refresh is the most effective single intervention for pet odor. Old zeolite infill saturated with ammonia compounds is extracted and removed entirely; the turf profile receives enzyme treatment to address residual bacterial contamination; and fresh zeolite-forward infill is installed with current odor-neutralizing capacity. Most pet area customers report significant and immediate odor improvement after refresh.
Service coverage
Artificial Turf of Irving provides infill refresh services across Irving, Las Colinas, Valley Ranch, Hackberry Creek, Cottonwood Valley, Plymouth Park, Hospital District, North Irving, Grand Prairie, Coppell, Farmers Branch, Carrollton, and surrounding DFW communities.
View All LocationsRelated Services
Explore additional turf solutions
Project Request